High-end-systems DL1 User Manual download pdf (Page 32)

2-12 Setup and Configuration DL.1 User Manual

Shutting Down the Fixture

The DL.1 fixture automatically shuts down in the event of DMX data loss. A DMX

controller can shut down the fixture remotely with the shutdown option in the

control channel–see “Control Function Options” on page 4-4.

Locking Pan and Tilt Positions

Before shipping the DL.1 fixture,

lock its pan and tilt in position so

the fixture does not move during

transit.

To lock the fixture:

1. Position the projector head as

shown in Figure 2-9 to pack

it in the road case.

2. Move the tilt lock peg to the

upper left (locked) position.

3. Pull the pan lock latch out

and move the fixture’s yoke

to slide it around the pole

located between the fixture

body and the bottom of the

yoke.

4. Release the pan lock, causing it to latch onto the pole.

5. Gently move the projector head and yoke to make sure both pan and tilt positions

are locked in place.

6. Place the DL.1 fixture in its provided road case for shipping.

Note: You can optionally lock pan and tilt positions during operation in the event

the projected image needs to remain in a fixed position.

Lock

Unlock

Figure 2-9 Pan and Tilt Locks

Tilt Lock

Pan Lock

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 81 82

No comments

High-end-systems DL1 User Manual Page 32