High End Systems AXON User Manual download pdf (Page 173)

CHAPTER 13

Effect Mode Options Descriptions

Axon Media Server User Manual 153

Modifier 3: Adjusts to the size of the sphere. A DMX value of 64 (25%) = no adjustment.

Adjusting toward 0 compresses the grid toward the vertical center. Values above the

midrange stretch the grid toward the edges of the image at a DMX value of 255 (100%).

When the Spherical Mapping option is selected in a Global Effect parameter and a

Graphic Effect parameter’s DMX value = 254, the Graphic Effect Modifier parameters make

the following Spherical Mapping adjustments:

Modifier 1: Corrects the vertical bend. A value of 0 = no adjustment. Values below the

midpoint bend the horizontal lines toward the “equator” to a maximum at 255.

Modifier 2: Adjusts the center of the vertical bend. A DMX value of 128 (50%) = no

adjustment. Adjusting toward 0 moves the bend center down to the bottom of the image.

Values above the midrange move the bend center up to the top of the image at a DMX

value of 255 (100%).

Modifier 3: Adjusts the center of the horizontal bend. A DMX value of 64 (25%) = no

adjustment. Adjusting toward 0 bends the vertical grid lines toward the center of the

output. Values above the midrange bends the lines away from the vertical center to a

maximum at 255 (100%).

TIP: Modifier channels for Effect Mode 1 are labeled as CMY in the

Wholehog 3 system so you can also make use of the color picker, HSI,

and other Wholehog 3 functions. Use the CMY parameter controls to

adjust the three Effect Mode 1 Modifier parameters for both the Global

and Graphic fixture types.

The default for Effect Mode 1 is set to CMY1 as well. Effect Mode 2

Modifier channels are labeled Mod 1, Mod 2, and Mod 3.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 287 288

No comments

High End Systems AXON User Manual Page 173