High End Systems DL1 User Manual Page 39
- Page / 82
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
DL.1 User Manual Fixture Operation 3-7
3
4. To reinstate the factory defaults if OFF is displayed, use the up and down arrows
on the Navigation button to scroll to ON and press the Enter button to select.
Pan/Tilt Swap
This option swaps the pan motor and tilt motor operation.
To swap Pan and Tilt:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to PAN/TILT
SWAP. The current state (ENABLED or DISABLED) will be displayed.
4. Use the up and down arrows on the Navigation button to scroll to ENABLED to
swap pan and tilt or DISABLED to revert fixture to default setting and press the
Enter button to select.
Pan Invert
This menu option inverts the direction of the pan motor to coordinate movements of
fixtures in opposite directions.
To invert the fixture’s Pan motion:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to PAN INVERT.
The current state (ENABLED or DISABLED) will be displayed.
4. Use the up and down arrows on the Navigation button to scroll to ENABLED to
invert Pan movement or DISABLED to revert fixture to default setting and press
the Enter button to select.
Tilt Invert
This menu option inverts the direction of the tilt motor to coordinate movements
between fixtures on a link facing each other vertically.
To invert the fixture’s Tilt motion:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to TILT INVERT.
The current state (ENABLED or DISABLED) will be displayed.
- User Manual 1
- Contacting High End Systems 2
- Declaration of Conformity 3
- Product Modification Warning 4
- FCC Information 4
- Important Safety Information 5
- Warranty Information 6
- Table of Contents 9
- Chapter 3: Fixture Operation 10
- Chapter 4: DMX Programming 11
- List of Figures 13
- Chapter 1: 15
- Features and Specifications 15
- Optional Accessories 16
- Specifications 17
- Projector Specifications 18
- Environmental Specifications 18
- Electrical Specifications 18
- Video Connectors: 19
- Chapter 2: 21
- Setup and Configuration 21
- Connecting Video 22
- Mounting the Fixture 24
- Mounting the Fixture Upright 25
- Truss Mounting 25
- Mounting Procedure 26
- Linking the Fixtures 27
- Setting up the Link 28
- Powering On the Fixture 29
- Viewing the Display Panel 30
- Setting the DMX Start Channel 31
- Shutting Down the Fixture 32
- Chapter 3: 33
- Fixture Operation 33
- The Menu Display 34
- Display in Menu Locked Mode 35
- Unlocking the Menu System 35
- Exiting the Menu System 35
- Menu Map 36
- scrolls between values 37
- selects 37
- Menu Option Descriptions 38
- Pan/Tilt Swap 39
- Pan Invert 39
- Tilt Invert 39
- Display Level 40
- Data Loss Timeout 40
- Projector Input Source 40
- Projector Default? 41
- Reset Projector Hours 41
- Striking the Projector Lamp 42
- Projector In By DMX? 42
- Iris Version 42
- Zoom Override Menu 43
- Focus Override Menu 43
- Projector Control 43
- Camera Option 44
- Align Pan Motors 45
- New Air Filter 45
- Fixture Mode Menu 46
- Test Options Menu 47
- Information Menu 48
- DMX Values Menu 49
- Temperatures Menu 49
- Display Errors 51
- Chapter 4: 53
- DMX Programming 53
- DMX Output Displays 54
- 16-bit DMX 54
- Parameter Descriptions 55
- Control Function Options 56
- DL.1 Protocol Tables 59
- Enhanced DL.1 Protocol 60
- Chapter 5: 61
- General Maintenance and 61
- Troubleshooting 61
- Replacing Parts 62
- Replacing the Lamp 63
- Replacing the Fuse 64
- M5 socket cap screws 65
- Phillips screws 65
- Replacing a Driver Board 66
- Replacing 2-Phase Board 67
- Replacing 3-Phase Board 67
- General Troubleshooting 68
- Table 5-1 LED States 69
- screw and LED locations 70
- Problem Solution 71
- Appendix 73
- Safety Information 73
- Appendice A 74
- Anhang A 75
- Apéndice A 76
- Vigtig Sikkerhedsinformation 77
- Appendix B: 79
- MSpeed Conversion Table 79
© 2020, manymanuals.com. All rights reserved. | 0.491 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals