High End Systems DL1 User Manual Page 44
- Page / 82
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
3-12 Fixture Operation DL.1 User Manual
To enable projector control:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to PROJECTOR
CTRL and press the Enter button to select .
4. Press the MENU button to return to the DL.1 menu system.
Limitations of Projector Control. The following projector options are not valid when
you’re controlling the projector with its menu system:
• Digital video connectors do not function
• RCA connectors do not function
• Input 1 (computer control) does not function
• The USB connector does not function
• Component video connectors do not function
• Audio in connectors do not function
The only valid inputs are: Input 2 (which selects the RBGHV or VGA connectors) and
Input 3 (which selects the S-Video connector).
Caution: Do not physically connect both the RGBHV and VGA connectors.
Doing so can cause damage to the fixture and void the warranty.
Camera Option
The DL.1 software automatically recognizes whether the fixture is equipped with the
Digital Eye Technology option and selectes the appropriate protocol.
To disable the Digital Eye Technology option installed in a fixture and revert to the
12-channel Reduced DMX Protocol:
1. Press the Menu button to unlock the menu system or to move back up the system
to the top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top
level to SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to CAMERA
OPTION. The current state will be displayed.
4. Use the up and down arrows on the Navigation button to scroll to DISABLED and
press the Enter button to select.
- User Manual 1
- Contacting High End Systems 2
- Declaration of Conformity 3
- Product Modification Warning 4
- FCC Information 4
- Important Safety Information 5
- Warranty Information 6
- Table of Contents 9
- Chapter 3: Fixture Operation 10
- Chapter 4: DMX Programming 11
- List of Figures 13
- Chapter 1: 15
- Features and Specifications 15
- Optional Accessories 16
- Specifications 17
- Projector Specifications 18
- Environmental Specifications 18
- Electrical Specifications 18
- Video Connectors: 19
- Chapter 2: 21
- Setup and Configuration 21
- Connecting Video 22
- Mounting the Fixture 24
- Mounting the Fixture Upright 25
- Truss Mounting 25
- Mounting Procedure 26
- Linking the Fixtures 27
- Setting up the Link 28
- Powering On the Fixture 29
- Viewing the Display Panel 30
- Setting the DMX Start Channel 31
- Shutting Down the Fixture 32
- Chapter 3: 33
- Fixture Operation 33
- The Menu Display 34
- Display in Menu Locked Mode 35
- Unlocking the Menu System 35
- Exiting the Menu System 35
- Menu Map 36
- scrolls between values 37
- selects 37
- Menu Option Descriptions 38
- Pan/Tilt Swap 39
- Pan Invert 39
- Tilt Invert 39
- Display Level 40
- Data Loss Timeout 40
- Projector Input Source 40
- Projector Default? 41
- Reset Projector Hours 41
- Striking the Projector Lamp 42
- Projector In By DMX? 42
- Iris Version 42
- Zoom Override Menu 43
- Focus Override Menu 43
- Projector Control 43
- Camera Option 44
- Align Pan Motors 45
- New Air Filter 45
- Fixture Mode Menu 46
- Test Options Menu 47
- Information Menu 48
- DMX Values Menu 49
- Temperatures Menu 49
- Display Errors 51
- Chapter 4: 53
- DMX Programming 53
- DMX Output Displays 54
- 16-bit DMX 54
- Parameter Descriptions 55
- Control Function Options 56
- DL.1 Protocol Tables 59
- Enhanced DL.1 Protocol 60
- Chapter 5: 61
- General Maintenance and 61
- Troubleshooting 61
- Replacing Parts 62
- Replacing the Lamp 63
- Replacing the Fuse 64
- M5 socket cap screws 65
- Phillips screws 65
- Replacing a Driver Board 66
- Replacing 2-Phase Board 67
- Replacing 3-Phase Board 67
- General Troubleshooting 68
- Table 5-1 LED States 69
- screw and LED locations 70
- Problem Solution 71
- Appendix 73
- Safety Information 73
- Appendice A 74
- Anhang A 75
- Apéndice A 76
- Vigtig Sikkerhedsinformation 77
- Appendix B: 79
- MSpeed Conversion Table 79
© 2020, manymanuals.com. All rights reserved. | 0.612 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals