High End Systems High End LCD Controller for Studio Color User Manual download pdf (Page 146)

6-16

Remote Page Access

Studio Color LCD Controller

Remote Page Access

The remote page access feature allows you to remotely play

back pages from the memory that you first select on the

controller’s front panel. (You cannot remotely select or

change memories.)

1. Connect the analog controller as described in the section

titled “Analog Inputs Ports” on page 6-15. Set switch B-3 on

the Studio Color LCD controller’s rear panel to OFF.

2. Select the memory containing the pages you want to remotely

access using the Cursor

<Up>

and

<Down>

arrow keys.

3. From the analog controller perform the applicable procedure,

a through c, to select the desired page. Table 6-1 summarizes

the channel functions.

0V = Disabled

5V-10V = Enabled

a. Channels 1 through 12 on the analog controller

correspond directly to pages 1 through 12 on the Studio

Color LCD controller.

Thus, if you enable channel 1 on the analog controller,

you call up page 1 on the Studio Color LCD controller,

channel 2 calls up page 2, and so on.

b. Simultaneously enabling any combination of two

channels on the analog controller calls up the page

number corresponding to the combination of the two

channel numbers (lowest number first). For example, if

you simultaneously enable channels 1 and 2, you call up

page 12. Enabling channels 7 and 3 calls up page 37.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 271 272

No comments

High End Systems High End LCD Controller for Studio Color User Manual Page 146