High End Systems High End LCD Controller for Studio Color User Manual download pdf (Page 190)

7-28

Macintosh

Studio Color LCD Controller

Verifying the Transfer

Open the Get Info window on the file you just captured to

make sure the file is about 256KB in size. If the file was

256KB, you are finished.

• If the file was larger than 0KB but less than 256KB, the

most likely cause was that something interrupted the

transfer. Check the cable connections on both ends,

verify the cable or replace it with a known working cable.

Begin again with the section titled “Setting Up the

Software” on page 7-25, making sure you do not press

the

key on the controller or close the file capture

until the transfer is complete.

• If the file was 0KB, the most likely reason is a faulty

cable or connection. Check the cable connections on

both ends, verify the cable or replace it with a known

working cable. Begin again with the section titled

“Setting Up the Software” on page 7-25.

Restoring (Uploading) Memory from

Computer to Controller

Make sure you followed the procedure in both the following

sections before continuing:

• “Connecting the Computer and Controller” on page 7-24

• “Setting Up the Software” on page 7-25

1. Press and hold down the

<Erase>

key on the controller’s front

panel (about 10 seconds) until its LCD display shows the

following:

)(;$2$

;()!D<;0:D

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 271 272

No comments

High End Systems High End LCD Controller for Studio Color User Manual Page 190