High End Systems High End LCD Controller for Studio Color User Manual download pdf (Page 60)

2-26

Powering On the Controller

Studio Color LCD Controller

Powering On the Controller

Before continuing, make sure you have done all of the

following:

1. Selected the controller’s voltage and frequency as described

in the section titled “Setting the Controller Voltage” on page

1-7.

2. Installed the correct fuse as described in the section titled

“Replacing the Fuse” on page 1-9.

3. Configured the controller’s switches as described in the

section titled “Setting the Switches” on page 2-4.

4. Configured and connected the fixtures as described in the

section titled “Connecting Fixtures” on page 2-9. (Also see

the Studio Color User Manual for additional details, such as

mounting, not covered here.)

5. Connected cabling to the controller as described in the

sections titled “Cables and Terminators” on page 2-14 and

“Master and Slave Controllers” on page 2-20 and “MIDI In

and Out Ports” on page 2-22 and “Other Connectors” on page

2-23.

6. Optional. Rack mounted the controller as described in the

section titled “Rack Mounting the Controller” on page 2-25.

Procedure for Powerin

1. Connect all fixtures to suitable power outlets. Consult the

documentation provided with the fixtures for details.

2. Power ON all fixtures connected to the Studio Color LCD

controller. To turn on fixture power, press the “

” side of the

fixture’s power switch.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 271 272

No comments

High End Systems High End LCD Controller for Studio Color User Manual Page 60