High End Systems High End LCD Controller for Studio Color User Manual download pdf (Page 46)

2-12

Connecting Fixtures

Studio Color LCD Controller

1. Keep pressing the

<Menu>

button on the fixture until the

menu appears as shown below:

Figure 2-5. The controller’s Addr(ess) menu allows you

to set an fixture number from 1—8 so the controller will

recognize the fixture.

2. Press the

<Enter>

button to view the current fixture number.

It should appear in the format F xx, as shown below:

Figure 2-6. The fixture number display.

Note If the display is not in the format F xx as shown

above, you must follow the instructions in the next

section, titled “Selecting Fixture Numbering” on page

2-13. Do not continue with this procedure.

3. Use the

<Up>

and

<Down>

arrow buttons to change the fixture

number if you wish. Do not select a fixture number higher

than 8 (or F 08) because the controller will send only fixture

numbers 1—8.

Note You must select a unique fixture number for each

fixture you wish to respond independently to control

commands. Selecting the same fixture number for

more than one fixture means that all fixtures will

respond to the same set of control commands.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 271 272

No comments

High End Systems High End LCD Controller for Studio Color User Manual Page 46