High End Systems High End LCD Controller for Studio Color User Manual download pdf (Page 169)

Studio Color LCD Controller

RAM Card: Memory

7-7

3. Use the Cursor

<Right>

and

<Left>

arrow keys to select ?

from the Main menu, as shown below:

4. Press the Cursor

<Down>

arrow key to view the menu items,

then use the Cursor

<Right>

and

<Left>

arrow keys to select

,, as shown below:

5. Press the

<Erase>

key to load the contents of the RAM card to

the controller, or press the

<Menu>

key to exit without loading

from the RAM card.

6. After pressing the

<Erase>

key, the LCD display appears as

shown below:

7. Press the

<Erase>

key again to begin the load operation, or

press the

key to cancel the operation. The controller

restarts after memory has been restored.

8. After memory has been restored, the controller is

automatically placed in mirror mode, causing subsequent

programming to be recorded to both the RAM card and to the

controller’s memory.

• If you wish to use mirror mode, leave the RAM card in

the slot.

• If you do not wish to use mirror mode, write-protect the

RAM card as shown in the section titled “RAM Card:

Write-Protection” on page 7-12, then remove the RAM

card and put it in a safe place.

) ? H-  

-D()

,  , 3,

- ;)

,  , 3,

N ;A)<;0:A)

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 271 272

Comments to this Manuals

No comments

High End Systems High End LCD Controller for Studio Color User Manual Page 169

Comments to this Manuals

Related products and manuals for Supplementary music equipment High End Systems High End LCD Controller for Studio Color